Commentary on The Savage 1907 PistolThe Firearm Blog

Welcome everybody to the TFB Armorer’s Bench! As talked about within the little blurb under, this sequence will give attention to a variety of house armorer and gunsmith actions. On this article, I’m beginning the yr off proper with a commentary article. Right now we’re overlaying the Savage 1907, America’s first mass-production double-stack handgun, its discipline strip, and customary points. Let’s dive into the very retro Artwork Deco double stack!

Enjoyable Thought: An American firm didn’t mass-produce one other double-stack handgun till the Nineteen Fifties (S&W 39) and the concept didn’t actually begin catching on (within the US) till the 70s.

TFB Armorer’s Bench: The Savage 1907

Right here, we at TFB hope to tell, entertain, and even encourage any would-be gunsmith or armorer on the market. Ideally, with the knowledge I present and with the assistance of our sponsors, you possibly can have some helpful data pertaining to the conservation and enchancment of firearms expertise whereas on the similar time sharing experiences and instructing one another new suggestions and methods alongside the way in which within the feedback. Digging deep into what it’s to be an armorer or gunsmith has significance however what’s vital is what these folks do to indicate they’ve earned that title. I’m comfortable to share my experiences and data and hope it’s informative!

Make your private security a precedence:

Observe correct gun security. All the time ensure that earlier than the firearm hits your bench that it’s unloaded and protected to be dealt with.
Put on the correct security tools. The principle one can be security glasses (respectable ones) since elements are sometimes below spring stress and chances are you’ll work with excessive RPM instruments. Different honorable mentions can be latex gloves or a respirator when working with probably dangerous solvents and oils. Additionally listening to safety when working with loud equipment or test-firing firearms.
Modifications, alterations, and customizations will void your firearm’s guarantee 9.5 occasions out of 10. Please take that into consideration earlier than making an attempt any at-home gunsmithing.
In case you are not sure about correct security practices, disassembly procedures, or guarantee requirements, cease, put down the instruments, and seek the advice of a reliable gunsmith.

Fast Historical past: Savage 1907

The Savage Mannequin 1907 took the firearms scene by storm with its revolutionary “Ten Photographs Fast!” double-stack journal, making waves from 1907 to 1920. Think about a compact .32 ACP pistol that tipped the scales at a mere 19 ounces however packed a stunning 10-round journal – an actual game-changer again within the day. It was just like the cool child on the block, providing transportable, concealable stopping energy that turned heads.

Whereas it wasn’t destined for Hollywood fame, the Savage Mannequin 1907 had its second within the navy highlight. Over 40,000 models discovered their approach into the palms of the French navy throughout World Battle I, proving it wasn’t only a showpiece. And let’s not overlook its 45 ACP audition for the US Military trials – nearly stealing the highlight from the Colt Mannequin 1911. Although it didn’t snag the lead function, its impression on semi-auto pistol designs was plain. The Savage Mannequin 1907: a strong performer that left a mark while not having the purple carpet therapy.

Savage 1907 Discipline Strip

Keep in mind to put on some security glasses on the very least with older firearm disassembly. A lot of elements are below spring stress. Discipline stripping the Savage Mannequin 1907 is tremendous easy. Appears apparent however triple examine your firearm is unloaded and your journal is eliminated.

From right here the slide may be locked again by bringing it to the rear and inserting the security within the protected place.

With the slide locked again, the cocking meeting/bolt may be eliminated. That is finished by greedy it, squeezing the hammer down, and rotating the meeting clockwise.

As soon as rotated, the cocking meeting may be pulled out of the again of the slide. Stress must be utilized to the hammer as a way to draw the meeting out.

Right here we will see that miserable the hammer lifts the cocking lever out of the way in which in order that it may be rotated and eliminated.

With the fake hammer depressed, the cocking tail lifts up. This may be seen within the decrease image.

With the cocking meeting out of the image, the slide may be CAREFULLY let down. That is finished by greedy the slide and disengaging the security so the slide is free.

It’s below a bunch of spring stress so watch out to not launch throughout the room.

After the slide is eliminated, the recoil spring and barrel may be lifted out of the body.

The recoil spring may be slid off of the barrel.

Reassembly is completed within the reverse order. The largest tip is that the cocking meeting will want the hammer to be depressed when reinserting it. In case you are extra of a visible learner Alex C did this on TFBTV years in the past.

Widespread Points & Potential Causes

It’s widespread for any outdated gun to have the occasional failure to feed, extract, eject, and many others. It’s simply one thing that comes with age. The Savage 1907 nonetheless is a particular case because it has a variety of inner elements that put on down. It might be for a number of causes however I’ll slim it down to a few.

They’re enjoyable weapons to shoot in order that they acquired shot lots.
They’re a double stack pistol (not many others have been customary till the 70s) so it arguably shot about twice as a lot on common.
The elements weren’t heat-treated to the absolute best high quality as a result of they nonetheless wanted to be hand-fit. 

Hammer Observe/Full Auto/Runaway:

One of the crucial widespread points with Savage 1907 pistols is the prevalence of hammer observe, full-auto hearth, or runaway conditions. Whereas not extraordinarily prevalent, this drawback stands out amongst numerous malfunctions.

Vital Word: It’s ill-advised to take aside your bolt/cocking meeting. It’s considerably tough to get again collectively however extra importantly, the items may be simply broken.

Usually, this subject stems from a worn sear or firing pin/striker ledge. The sear holds the firing pin via a ledge on the entrance of the pin. When the set off bar/sear journey is pulled rearward, the sear lifts barely, permitting the firing pin/striker to slip beneath and have interaction.

Over time, the ledge on the firing pin can develop into rounded and worn. An efficient repair, whereas retaining the unique striker, entails eradicating it and flipping it 180 levels to reveal a contemporary aspect/ledge that interfaces with the sear. Because the firing pin/striker is uniform throughout, it may be flipped with none drawback, and it received’t rotate again because of the pin hooked up to the fake hammer within the again.

Whereas I haven’t personally carried out this repair, contemplating the widespread prevalence of this subject, choosing a brand new or substitute firing pin/striker is likely to be extra advisable than merely flipping it, particularly if the unique was smooth sufficient to spherical off. Sadly, I’m not conscious of any copy elements obtainable, so a substitute may also be prone to put on. Skilled warmth therapy might probably deal with this subject.

Nevertheless, warning is required on the subject of warmth therapy, as a firing pin/striker that’s too exhausting can develop into brittle and susceptible to breakage, whereas one that’s too smooth will deform and put on, resulting in extra issues, together with those self same hammer observe or runaway conditions.

Failures to Extract:

Failures to extract contain conditions the place the gun fires, however the spent shell casing doesn’t get pulled from the chamber. If the slide strikes to the rear, the problem might be attributed to a few most important elements, so as of chance: a grimy or rusty chamber, a damaged or worn extractor, or a worn chamber because of the gun’s age and in depth use.

To deal with soiled chambers, common cleansing, and upkeep are really useful. For damaged extractors, substitute is important. Coping with a worn chamber could contain consulting a gunsmith who can reline barrels, but it surely is likely to be more cost effective to contemplate shopping for one other Savage 1907 or a substitute barrel.

Lifeless Triggers:

A lifeless set off happens when the set off fails to reset, feeling free and unresponsive. This drawback is usually related to put on on the set off bar/sear journey or the sear itself, the place it interfaces with the set off bar/sear journey. The inner elements of the Savage 1907 are typically comparatively smooth, a standard development for weapons of its period. Given its age and in depth use, the one sensible answer is to exchange the worn half, although diagnosing which half is the perpetrator may be difficult.

Moreover, lifeless triggers might be associated to built-in security interlocks, indicating an out-of-battery scenario. This may occasionally happen resulting from points stopping the rotating barrel from absolutely locking into its place, probably brought on by filth or free elements interfering with the correct reset.

Feed Points:

The distinctive double-stack magazines launched in 1907 are skinny steel mags. Dents in these magazines may cause jams, and worn or broken feed lips can result in constant feeding issues. Replica 8-round magazines can be found, though their reliability could range. Unique magazines are sometimes priced over $100, making them costly to exchange.

Closing Ideas: Savage 1907 Commentary

So yeah, the Savage 1907 can have some critical and harmful issues. BUT in case you discover one in good and up situation you’ll seemingly have few points. They’re identified to be wonderful and delightful handguns. I’ll add on and say they’re a hoot to shoot. Maintain sustaining yours with correct cleanings and wipedowns! Properly, that’s all for now of us. Let me know in case you’ve skilled any issues together with your Savage 1907 you probably have one. Most people I do know love theirs and infrequently have points.

As all the time, thanks for studying TFB! Be protected on the market, have enjoyable whereas capturing, and we are going to see you subsequent time for the TFB Armorer’s Bench! Additionally, tell us what you suppose within the feedback under! We all the time admire your suggestions.